Bars (DIN EN 754-2)2
Here you will find an overview of all the standard materials we use. In addition, we are also available to you as a development partner for individual alloys.
Please feel free to contact us - we look forward to exchanging ideas with you.
Series 1000
| Description | Chemical composition)1 (DIN EN 573-3, version of Nov. 2007)2 |
Obs.)1 | Delivery condition)3 | Available diameters in mm | Rm [MPa] | Rp 0.2 [MPa] | A 100 mm [%] | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Numerical | Chem. symbols | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | min. | max. | min. | % min. | |||
| EN AW - 1050A | EN AW - Al99.5 | 0.25 | 0.40 | 0.05 | 0.05 | 0.05 | - | 0.07 | 0.05 | - | H14 H16 H18 |
12 12 12 |
100 120 145 |
135 160 - |
70 105 125 |
6 4 3 |
| EN AW - 1070A | EN AW - Al99.7 | 0.20 | 0.25 | 0.03 | 0.03 | 0.03 | - | 0.07 | 0.03 | - | H14 H18 |
12 12 |
95 125 |
- - |
- - |
- - |
| EN AW - 1080A | EN AW - Al99.8 | 0.15 | 0.15 | 0.03 | 0.02 | 0.02 | - | 0.06 | 0.02 | 0.03 Ga | H14 H18 |
12 12 |
- - |
- - |
- - |
- - |
| EN AW - 1090 | EN AW - Al99.90 | 0.07 | 0.07 | 0.02 | 0.01 | 0.01 | - | 0.03 | 0.01 | 0.03 Ga; 0.05 V | H14 H16 H18 |
7 6 5 |
85 100 115 |
- - - |
- - - |
- - - |
| EN AW - 1098* | EN AW - Al99.98 | 0.010 | 0.006 | 0.003 | - | - | - | 0.015 | 0.003 | - | H14 H16 H18 |
7 6 5 |
85 100 115 |
- - - |
- - - |
- - - |
| EN AW - 1199* | EN AW - Al99.99 | 0.006 | 0.006 | 0.006 | 0.002 | 0.006 | - | 0.006 | 0.002 | 0.005 Ga; 0.005 V | H14 H18 |
7 5 |
70 110 |
110 - |
- - |
- - |
| EN AW - 1350A | EN AW - Al99.5 | 0.25 | 0.40 | 0.02 | - | 0.05 | - | 0.05 | - | 0.03 Cr+Mn+Ti+V | H14 H16 H18 |
12 12 12 |
100 120 145 |
135 160 - |
70 105 125 |
6 4 3 |
| EN AW - 1370 | EN AW - Al99.7 | 0.10 | 0.25 | 0.02 | 0.01 | 0.02 | 0.01 | 0.04 | - | 0.03 Ga; 0.02 B, 0.02 V+Ti | H14 H18 |
12 12 |
95 125 |
- - |
- - |
- - |
Different alloys on request
* On request
1 Max. values unless otherwise specified
2 Unless otherwise specified
3 Other intermediate states resp. non-standardised states according to customer specifications also available
Series 2000
| Description | Chemical composition)1 (DIN EN 573-3, version of Nov. 2007)2 |
Obs.)1 | Delivery condition)3 | Available diameters in mm | Rm [MPa] | Rp 0.2 [MPa] | A 100 mm [%] | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Numerical | Chem. symbols | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | min. | max. | min. | % min. | |||
| EN AW - 2011 | EN AW - AlCu6BiPb | 0.40 | 0.7 | 5.0-6.0 | - | - | - | 0.30 | - | 0.20-0.6 Bi; 0.20-0.6 Pb)4 | T3 T39 T351 |
12 11 11 |
320 370 320 |
- - - |
270 290 270 |
10 3 8 |
| EN AW - 2014 | EN AW - AlCu4SiMg | 0.50-1.2 | 0.7 | 3.9-5.0 | 0.40-1.2 | 0.20-0.8 | 0.10 | 0.25 | - | - | T39 T351 |
8 8 |
450 380 |
- - |
380 290 |
2 6 |
| EN AW - 2017A | EN AW - AlCu4MgSi | 0.2-0.8 | 0.7 | 3.5-4.5 | 0.40-1.0 | 0.40-1.0 | 0.10 | 0.25 | - | 0.25 Zr+Ti | T39 T351 |
12 12 |
420 420 |
- - |
290 250 |
3 6 |
| EN AW - 2024 | EN AW - AlCu4Mg1 | 0.50 | 0.50 | 3.08-4.9 | 0.30-0.9 | 1.2-1.8 | 0.10 | 0.25 | 0.15 | - | T39 T351 |
12 |
450 425 |
- - |
400 310 |
2 6 |
| EN AW - 2117 | EN AW - AlCu2.5Mg | 0.8 | 0.7 | 2.2-3.0 | 0.20 | 0.20-0.50 | 0.10 | 0.25 | - | - | T351 | 7 | 290 | 340 | - | 8 |
Different alloys on request
1 Max. values unless otherwise specified
2 Unless otherwise specified
3 Other intermediate states resp. non-standardised states according to customer specifications also available
4 Modified according to End of Life Vehicle Directive with Pb < 0.40% also available
Series 3000
| Description | Chemical composition)1 (DIN EN 573-3, version of Nov. 2007)2 |
Obs.)1 | Delivery condition)3 | Available diameters in mm | Rm [MPa] | Rp 0.2 [MPa] | A 100 mm [%] | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Numerical | Chem. symbols | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | min. | max. | min. | % min. | |||
| EN AW - 3103 | EN AW - AlMn1 | 0.50 | 0.7 | 0.10 | 0.9-1.5 | 0.30 | 0.10 | 0.20 | - | 0.10 Zr+Ti | H111 H12 H14 H16 H18 |
13 13 12 10 8 |
95 100 130 160 180 |
130 140 165 195 - |
35 - 110 130 145 |
25 8 6 4 3 |
Different alloys on request
1 Max. values unless otherwise specified
2 Unless otherwise specified
3 Other intermediate states resp. non-standardised states according to customer specifications also available
Series 4000
| Description | Chemical composition)1 (DIN EN 573-3, version of Nov. 2007)2 |
Obs.)1 | Delivery condition)3 | Rm [MPa] | Rp 0.2 [MPa] | A 100 mm [%] | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Numerical | Chem. symbols | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | min. | max. | typical | typical | ||
| EN AW-4043A | EN AW-Al Si5(A) | 4,5-6,0 | ≤0,6 | ≤0,30 | ≤0,15 | ≤0,20 | ≤0,10 | ≤0,15 | O, H111 H12 H14 H16 H18 |
- 120 140 160 185 |
140 160 180 200 - |
70 140 160 180 205 |
25 5 4 4 3 |
||
| EN AW-4046 | EN AW-Al Si10Mg | 9,0-11,0 | ≤0,50 | ≤0,03 | ≤0,40 | 0,20-0,50 | ≤0,10 | ≤0,15 | O, H111 H12 H14 H16 H18 |
- 140 160 180 200 |
160 180 200 220 - |
50 135 155 175 195 |
25 10 4 3 2 |
||
| EN AW-4047A | EN AW-Al Si12(A) | 11,0-13,0 | ≤0,6 | ≤0,30 | ≤0,15 | ≤0,10 | ≤0,20 | ≤0,15 | O, H111 H12 H14 H16 H18 |
- 150 170 190 210 |
170 |
60 145 165 185 205 |
25 10 4 3 2 |
||
Different alloys on request
1 Max. values unless otherwise specified
2 Unless otherwise specified
3 Other intermediate states resp. non-standardised states according to customer specifications also available
Series 5000
| Description | Chemical composition)1 (DIN EN 573-3, version of Nov. 2007)2 |
Obs.)1 | Delivery condition)3 | Available diameters in mm | Rm [MPa] | Rp 0.2 [MPa] | A 100 mm [%] | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Numerical | Chem. symbols | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | min. | max. | min. | % min. | |||
| EN AW - 5005A | EN AW - AlMg1 |
0.30 | 0.45 | 0.05 | 0.15 | 0.7-1.1 | 0.10 | 0.20 | - | - | H14 H18 |
12 10 |
140 185 |
200 - |
110 155 |
6 4 |
| EN AW - 5019 | EN AW - AlMg5 |
0.40 | 0.50 | 0.10 | 0.10-0.6 | 4.5-5.6 | 0.20 | 0.20 | 0.20 | 0.10-0.6 Mn+Cr | H111 H12 H14 H18 H19 H38 |
12 12 12 10 8 10 |
280 270 300 350 390 360 |
340 350 380 - - - |
- - - - - - |
16 8 4 2 1 3 |
| EN AW - 5052 | EN AW - AlMg2.5 |
0.25 | 0.40 | 0.10 | 0.10 | 2.2-2.8 | 0.15-0.35 | 0.10 | - | - | H111 H12 H14 H18 |
12 12 12 10 |
170 210 230 270 |
230 250 270 - |
65 160 180 220 |
20 7 5 2 |
| EN AW - 5154A | EN AW - AlMg3.5 |
0.50 | 0.50 | 0.10 | 0.50 | 3.1-3.9 | 0.25 | 0.20 | 0.20 | 0.10-0.50 Mn+Cr | H14 H18 |
7 5 |
260 310 |
320 - |
200 240 |
5 3 |
| EN AW - 5183 | EN AW - AlMg4.5Mn0.7 |
0.40 | 0.40 | 0.10 | 0.50-1.0 | 4.3-5.2 | 0.05-0.25 | 0.25 | 0.15 | - | H111 H12 H14 H18 |
6 8 7 5 |
270 280 300 360 |
350 370 - - |
110 200 235 280 |
16 6 4 1 |
| EN AW - 5754 | EN AW - AlMg3 |
0.40 | 0.40 | 0.10 | 0.50 | 2.6-3.6 | 0.30 | 0.20 | 0.15 | 0.10-0.6 Mn+Cr | H14 H24 34 H16 H18 H28 H38 H19 |
12 12 10 8 |
240 260 280 320 |
290 310 - - |
180 200 240 300 |
4 3 3 2 |
Different alloys on request
1 Max. values unless otherwise specified
2 Unless otherwise specified
3 Other intermediate states resp. non-standardised states according to customer specifications also available
Series 6000
| Description | Chemical composition)1 (DIN EN 573-3, version of Nov. 2007)2 |
Obs.)1 | Delivery condition)3 | Available diameters in mm | Rm MPa | Rp 0.2 [MPa] | A 100 mm [%] | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Numerical | Chem. symbols | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | min. | max. | min. | % min. | |||
| EN AW - 6056 | EN AW - AlSi1MgCuMn |
0.7-1.3 | 0.50 | 0.50-1.1 | 0.40-1.0 | 0.6-1.2 | 0.25 | 0.10-0.7 | - | 0.20 max. Zr+Ti | H13 T39 T651 |
12 12 12 |
175 360 380 |
230 - - |
180 320 350 |
4 2 6 |
| EN AW - 6060 | EN AW - AlMgSi |
0.30-0.6 | 0.10-0.30 | 0.10 | 0.10 | 0.35-0.6 | 0.05 | 0.15 | 0.10 | - | T39 T39 T651 |
10 6 12 |
220 270 215 |
- - - |
140 200 160 |
6 4 10 |
| EN AW - 6061 | EN AW - AlMg1SiCu |
0.40-0.8 | 0.70 | 0.15-0.40 | 0.15 | 0.8-1.2 | 0.04-0.35 | 0.25 | 0.15 | - | T39 T651 |
12 12 |
260 310 |
- - |
210 260 |
6 6 |
| EN AW - 6082 | EN AW - AlSi1MgMn |
0.7-1.3 | 0.50 | 0.10 | 0.40-1.0 | 0.6-1.2 | 0.25 | 0.20 | 0.10 | - | T39 T451 T651 |
12 12 12 |
310 205 310 |
- - - |
270 110 255 |
5 12 8 |
Different alloys on request
1 Max. values unless otherwise specified
2 Unless otherwise specified
3 Other intermediate states resp. non-standardised states according to customer specifications also available
Series 7000
| Description | Chemical composition)1 (DIN EN 573-3, version of Nov. 2007)2 |
Obs.)1 | Delivery condition)3 | Available diameters in mm | Rm [MPa] | Rp 0.2 [MPa] | A 100 mm [%] | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Numerical | Chem. symbols | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | min. | max. | min. | % min. | |||
| AA 7068* | AlZn7.5Mg2.5Cu2 | 0.12 | 0.15 | 1.6-2.4 | 0.10 | 2.2-3.0 | 0.05 | 7.3-8.3 | 0.10 | 0.05-0.15 Zr | T7651 | 10 | 580 | - | 500 | 4 |
| EN AW - 7075 | EN AW - AlZn5.5MgCu |
0.40 | 0.50 | 1.2-2.0 | 0.30 | 2.1-2.9 | 0.18-0.28 | 5.1-6.1 | 0.20 | - | H111 T651 T7351 |
12 10 10 |
- 540 455 |
275 - - |
165 (max.) - - |
10 4 6 |
Different alloys on request
* On request
1 Max. values unless otherwise specified
2 Unless otherwise specified
3 Other intermediate states resp. non-standardised states according to customer specifications also available